drywall resources

It's very common for screws in drywall to become loose overtime. This bubbling, blistering, or bumpy effect in walls is brought on by the drywall pushing out the screw or nail heads as it shifts. That is known as nail pops in the drywall industry. Generally, this is a sign that the walls could be needing fresh drywall work and paint. drywall information

For premature nail pops, you can sometimes repair them without professional assistance. For larger or more complicated jobs, a specialist drywall contractor is the best resource given that they retain all the correct tools, equipment, and training. If you would like to fix a few nail pops around the house all on your own, continue reading to learn some tips for doing just that!

Nail Pop Repair

To fix nail pops in your drywall, you will need a few supplies. You might have many of these materials readily available already, and anything you don't have are available at the local home improvement or hardware store. Listed here is what you will need:

Stud Finder (optional)

Hammer (or nail punch)

2 Drywall Screws

Screwdriver

Drywall Mud

Drywall Knife

Sandpaper (200 grit is fine)

Paint and Primer

To get going, make sure you have all the mandatory tools and supplies to ensure that you do not have to avoid halfway through to produce a trip to the store. Once you have everything you need, start with locating the framing around the area with nail pops. Use your fingers to tap the wall before you can hear a great reverberation instead of a hollow one. It's also possible to make use of a stud finder. Once you see a sharper sound, tap each side to make certain it sounds hollow. If this happens, then you definitely have located the framing. everything drywall

Next, utilize the drywall screws to re-attach the loosened drywall to the framing. Place each screw 2 to 3 inches above and below the nail pop. Then use your hammer to depress the nail pop back to the wall. Do this step gently as not to put an opening or dent in the wall.

Use the drywall knife to scrap away any excess drywall material that has flaked or crumbled off. Then utilize the drywall mud to cover the screw heads in the wall. Two coats have to do the trick. Follow the instructions or search for online tutorials on the best way to apply drywall mud.